Muzata328Feet 1/8Inch Rope Cable,Hand Crimper Tool,Cable Cutter and Crimping Loop Sleeve Set CK03,Series CA1 CT1

Price: $193.99
Product prices and availability are accurate as of 2020-10-17 23:05:56 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
In Stock.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Features

Of this set, there is 2 sets of wire rope cable, this flexible wire making it easy to work with, and has a low co-efficient of stretch. Its ease of use makes it excellent for use with Thimble and Ferrule fittings as well as hydraulically swaged fittings. The wire or rope you are using is the same diameter as the crimping sleeve hole, 1/8" steel less wire rope cable or smaller will fit in the sleeve. The swaging tool can crimp multiple sizes ferrules including 1/16”,5/64”,3/32”,7/64”,1/8” for use on the paired cable. You also can use the 1/8 for 5/32 - there is at least that much error in the crimp that it should work just fine. These sizes refer to the diameter of the cable and the inside diameter the sleeve. This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut Perfect set for installing your cable railing project . for all cable railing fitting series -- search muzata CA1 ; for stair angled railing series -- search muzata CS1 ; for cable railing tool series -- search muzata CT1 ; for cable railing wire rope series -- search muzata WP1 ;

Write a Review